|
Building a Truss Enclosure A "Truss Enclosure" has unlimited uses. From framing an area in a trade show or surrounding a dance floor this structure will serve unlimited usage. Hanging and directing your Lights and Effect machines or suspending curtains or promotional material is a simplematter with this lightweight and attractive assembly. Materials list: 4 top rails (Select length as desired) 4 right angle corners (wih legs) 4 legs 48 bolts (1/4 0R 5/16 recommended) 48 nuts (to fit) 48 washers to fit Attach top rails to corners using 3 nuts and bolts at each junction. Attach legs. PLEASE NOTE; These structures are designed to use a minimum of three bolts at each junction. To maintain structural integrity ensure that every junction is properly secured with three bolts. NOTE: Each corner junction will add approximately 1 foot to the length of your rails so you would use rails 2 feet shorter than your desired finished dimension. For example; an 8 foot square would require 4 right angle corners and 4 six foot rails. You will also note that all components are manufactured and measured in metric lengths which do not convert exactly to common measurements using standard feet and inches. If you require assistance please contact us with a diagram or dimensions and we will be happy to produce a materials requirement list and a cost estimate for the components to complete your project. Exact measurements can be built but with considerable increased cost due to custom cutting and assembly.
|
| 
